jes notes Index Gallery . Clavichords Cyclecar Dehumidifier Financial Data FreeCAD MSVA Philosophy Signed Distance Functions Shaft passers Snap issues
2026-11-10
Last modified: 2026-11-11 14:51:35
< 2026-11-09 2026-11-11 >
Mower deck
I tipped the mower on its side to have a look at the deck, I was planning to completely clean it and paint it and also sharpen the blades,
but it was much too grubby for this to work, I think next time I will tip it against a tree and jetwash it, scraping the grass
off isn't going to work.
I also didn't bother sharpening the blades.
I scraped off all the grass and dirt that I could:
And sprayed a load of WD40, hopefully this stops it rusting.
Plasma CAM
We should be able to get an AI-generated CAM program for plasma cutting:
- easy import from FreeCAD (project STL/3MF on to flat, plus DXF and SVG)
- scale and mirror option
- rotate/translate for manual nesting
- tell it the size of your material and mark keep-out zones
- auto-nest option (https://github.com/azmtkrdnv/sheetnest ? or from scratch)
- auto lead in/out but option to tweak start/end point or lead distance per profile
- "settings library" where you can have like kerf width, feed rate, pierce delay stored under names, say "3mm steel"
- show the shapes & paths on a 2d view where "keep parts" are filled in slightly different to background colour, cut automatically goes on correct side and direction
- output gcode for grbl with clear comments explaining what each section is, I find this useful when manually cutting parts out of FreeCAD's gcode
< 2026-11-09 2026-11-11 >