jes notes Index Gallery . Clavichords Cyclecar Dehumidifier Financial Data FreeCAD MSVA Philosophy Signed Distance Functions Shaft passers Snap issues

2026-11-09

Last modified: 2026-11-09 13:47:17

< 2026-11-08 2026-11-10 >

Plasma cutter

The space for the water tray is about 600x400 and maybe wants to be 100mm tall. Can I find a metal tray like this cheaply?

What kind of things should we be looking at? It just wants to not melt when hot sparks hit it, and not leak water.

It's OK if it's too tall because I can cut it down.

There is https://abtoolsonline.com/products/stainless-steel-low-profile-drip-tray-pan-600-x-400-x-48-holder-container-for-bbq this kind of thing, but only 48mm tall. I'd really like the extra height because it will help keep water from splashing out.

Maybe could just rivet on some side extensions? Kind of annoying to have to do.

Commercial kitchens have big roasting pans, I think this is the way to go. 520x420 is a common size, which would be good enough for me.

One called "K414" on Amazon, £36 though, seems a bit steep.

OK, stainless steel cat litter trays??

https://www.amazon.co.uk/Suhaco-Stainless-Litter-Cleaning-Leakage/dp/B0DL9XWT8K 600x400x100 for £18, golden, ordered.

Oh damn, this is only 1.1kg? Suggests only 0.3mm thick, I will just pay £36 for the catering one. It just stings a bit to be paying so much of the overall machine cost on such a trivial part.

In the absence of the new consumables I get design the manual Z axis.

I'm thinking:

Do the manual leadscrews want to lock so that vibration can't make them move? Not for now, see if it is a problem.

I think the Z slides can still be the existing ones, we just use the existing mounting hole to attach the leadscrew retainer or something? And then screwing the leadscrew slides it up and down relative to the retainer thing?

Or we basically attach a nut to the existing mounting hole, and the leadscrew is trapped in the moving part, so when you screw it the nut stays still and the leadscrew moves up and down?

The leadscrew wants to be off centre else it will inhibit screwing the mounting hole.

And what about the leadscrew for tilt control? Should it be like a worm and wheel? Or more like the Y axis belt tensioner?

I think like the Y axis belt tensioner. Worm and wheel idea is fun but requires quite good tolerances on the teeth, seems hassle.

For both the Z position and the angle, we can potentially use the weight of the torch to preload it downwards, and then just use the screw to hold it up. Also it's fine if angle adjustment interacts with height adjustment, to avoid that you'd need to know the location of the tip of the torch and make sure the pivot passes through it. Maybe that's worth while actually?

No, because then the pivot would crash into the work unless it was a complicated hollow pivot type thing. OK, just have to let angle adjust affect height, no big deal.

One risk is that the torch cable could pull on the torch and undo the preload, which, just ignore for now I think.

Meh, I got as far as this:

But I don't like it, I'm going to stop. I think this is a bad design and the improvement over what I already have is really not that much.

< 2026-11-08 2026-11-10 >